{ "id": "portable-washer-drain-hose-2m", "sku": "portable-washer-drain-hose-2m", "title": "2m Portable Washer Drain Hose Extension Kit", "slug": "portable-washer-drain-hose-2m", "price": 75.99, "currency": "NZD", "availability": "in_stock", "category": "appliance-drain-hoses", "category_label": "Washing Machine & Dishwasher Drain Hoses", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.17 kg", "images": [ "https://drains.net.nz/dropship-images/appliance-drain-hoses/portable-washer-drain-hose-2m/main-portable-washer-drain-hose-2m.jpg", "https://drains.net.nz/dropship-images/appliance-drain-hoses/portable-washer-drain-hose-2m/portable-washer-drain-hose-2m-2.jpg", "https://drains.net.nz/dropship-images/appliance-drain-hoses/portable-washer-drain-hose-2m/portable-washer-drain-hose-2m-3.jpg", "https://drains.net.nz/dropship-images/appliance-drain-hoses/portable-washer-drain-hose-2m/portable-washer-drain-hose-2m-4.jpg", "https://drains.net.nz/dropship-images/appliance-drain-hoses/portable-washer-drain-hose-2m/portable-washer-drain-hose-2m-5.jpg" ], "description_short": "A 6.5ft flexible corrugated hose packed with three clamps, a U-bend holder and a stepped adapter sized for 3/4, 7/8, 1-1/4 and 1-1/2 inch outlets, so the connection stays tight and the water goes where you point it.", "description": "The problem nobody warns you about\n\nYou get the washing machine home, slide it into the alcove, and then discover the drain hose stops about half a metre short of the laundry tub. Or the portable washer sits on a kitchen bench and the hose dangles nowhere near the sink. It is a small problem with an annoying shape, because the machine itself works perfectly. Everything else is ready. The water just has nowhere sensible to go.\n\nManufacturers supply short hoses for good reasons. A shorter run is easier for the drain pump, it ships in a smaller carton, and it suits the average installation. The trouble is that average installations are rarer than you would think. Laundries get renovated, apartments get odd layouts, and portable machines live wherever there is space. That is the gap a washer drain hose extension fills.\n\nHow a drain extension actually works\n\nA washing machine does not drain by gravity. A pump inside the machine pushes water out through the hose, which is why the hose can run uphill to a tub rim and still empty. That pump has limits, though, and those limits are what you are working within when you add length.\n\nTwo things matter. The first is total run length, because every metre adds friction. The second is discharge height, the vertical distance from the floor to the point where water leaves the hose. Your machine's manual gives a maximum for both. Stay inside those numbers and an extension is invisible to the machine. Push past them and you start seeing drain errors, slow cycles, or water left sitting in the drum.\n\nThis kit adds roughly two metres. For most households that lands comfortably inside the manufacturer's allowance, especially when the factory hose is already short. If you already have a long run and you are adding to it, pull out the manual and do the sums first.\n\nWhat is in the kit and why each piece matters\n\nThe hose itself is corrugated ABS plastic, grey, about 198 cm long and 2.5 cm across. Corrugation is the key feature. A smooth-walled hose of this diameter would fold flat the moment you curved it around a cabinet. The ribs let it take a bend while holding the channel open, which is exactly what a flexible corrugated drain hose is designed to do.\n\nThe adapter is the part that decides whether this fits your machine at all. It is stepped for four common sizes, 3/4, 7/8, 1-1/4 and 1-1/2 inch. That range covers a lot of washers and most dishwashers, but it is not universal. Measuring takes thirty seconds and saves a return.\n\nThree hose clamps come with it. People sometimes assume a push-fit is enough, and for a few cycles it often is. Then the pump surges, the hose breathes, and one day the connection walks itself off while you are at work. Clamps are cheap insurance against a wet floor.\n\nThe U-bracket is the piece most people overlook and then quietly appreciate. It holds the open end of the hose in a fixed hook over the tub or standpipe. Without it, the discharge end can whip out under pressure, or slide down into the drain where it siphons water back out of the machine mid-cycle. Both failures are common and both are easily avoided.\n\nWho this suits\n\nApartment dwellers with a portable washer get the clearest benefit. A portable washing machine drain hose almost always needs to reach a kitchen sink that was never designed with laundry in mind, and the factory hose is rarely generous.\n\nIt also suits anyone who has moved a machine during a renovation, anyone whose standpipe sits behind a cupboard, and anyone running a dishwasher in a kitchen where the waste connection is on the far side of the cabinetry. Van and caravan setups work too, as long as you keep the run falling and secure it against travel vibration.\n\nIt does not suit you if your drain outlet falls outside the adapter's size range, or if your existing hose is split and needs replacing rather than extending. In that second case, buy a full replacement hose and skip the join entirely. Fewer connections means fewer places to leak.\n\nChoosing the right extension\n\nStart with the measurement. Put a tape across the outside of your machine's drain spigot at its widest point. That number, in inches or millimetres, tells you which adapter step you need. If you land between two sizes, pick the one that gives a firm push-on fit before you add the clamp.\n\nNext, measure the distance you actually need to cover. Run a piece of string from the machine outlet to where the water has to end up, following the path the hose will take rather than the straight line. People routinely underestimate this by half a metre because they forget the hose has to go around things, not through them.\n\nThen check two numbers in your appliance manual, maximum drain hose length and maximum discharge height. Compare them against what you are planning. If the plan fits, order. If it does not, you may need to move the machine closer rather than make the hose longer.\n\nFinally, think about the discharge end. A laundry tub rim is ideal because the U-bracket hooks straight over it. A standpipe works if the hose end sits inside the pipe but not pushed down deep, since you want an air gap to prevent siphoning. A kitchen sink is fine for a portable machine, with the bracket over the edge.\n\nFitting it without drama\n\nUnplug the machine and have a towel ready, because there is always a cup of water left in the old hose. Pull the factory hose free of its clip, fit the adapter to the machine end, and push the extension hose on until it seats past the ridge. Slide a clamp over the overlap and tighten until the hose dimples slightly. Do not crank it until the plastic creaks.\n\nLay the run out with a gentle fall toward the drain. Avoid tight right-angle bends and check nothing is pinched where the machine meets the wall. Fit the U-bracket on the discharge end and hook it securely over the tub or standpipe.\n\nThen test. Run a short rinse or spin cycle and stand there watching the joins. Two minutes of watching now beats mopping later. If you see a bead of water forming at a clamp, tighten a quarter turn and test again.\n\nKeeping it working\n\nDrain hoses are low maintenance but not zero maintenance. Every few months, glance at the clamps and give them a check by hand. Look for chafing where the hose crosses a cabinet edge or sits against a sharp bracket. Vibration plus a hard edge wears through plastic eventually.\n\nIf you notice any smell, it usually means water is sitting in a low spot rather than draining away. Adjust the run so it falls consistently, then flush clean water through. Avoid drain cleaners and solvents in the hose, since they can attack ABS over time.\n\nWhen storing a hose, hang it rather than coiling it tightly in a cupboard. A hose left folded for months takes a set and never quite straightens out.\n\nThe short version\n\nThe factory hose on most machines is short because that suits the average install, not yours. This kit adds about two metres of corrugated ABS hose, with a four-size adapter, three clamps and a U-bracket to hold the discharge end steady. Measure your drain outlet first, check your manual for maximum length and height, keep the bends gentle, and clamp both ends properly. Do that and the extension just quietly works, which is all anyone wants from a drain hose.", "llm_summary": "The MAREKINEKO portable washer drain hose extension kit is a 6.5 foot (about 2 metre) corrugated drain hose made from ABS plastic in grey, measuring 198.1 cm long by 2.5 cm wide and weighing 0.17 kg. The kit includes the hose, one adapter, three hose clamps and one U-bracket holder. The adapter covers drain port sizes of 3/4, 7/8, 1-1/4 and 1-1/2 inches, so it suits many washing machines, portable washers and dishwashers. It is intended to extend drainage reach when the factory hose is too short to reach a laundry tub, standpipe or sink. Country of origin and warranty terms are not specified by the maker. Fitment should be confirmed by measuring the appliance drain outlet first.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Drains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.net.nz/portable-washer-drain-hose-2m/", "canonical_url": "https://drains.net.nz/portable-washer-drain-hose-2m/", "json_url": "https://drains.net.nz/api/products/portable-washer-drain-hose-2m.json", "updated_at": "2026-10-11" }